Lathe DRO: Fagor Innova Digital Readout 20i-T

Fagor Innova 20i-T 2 Axis digital readout (DRO) for Metal Lathe / Positionsanzeige für Drehmaschine

Complete with 2 pieces of linear scales: from 100 to 900 mm (4" to 36")travel length.

Free shipping.

With 12 months Warranty, mounting arm for display box and English manual.
(Manual in German, Spanish,  Italian & Chinese  languages is available).

 Features / Front Panel:

• ON/OFF key
• ABS key - the LED stays on when operating in absolute mode and off when in incremental mode.
• 'F' key - to access the special functions:
• "freeze" or HOLD the present coordinate so that you may return to it after you had changed to a new tool.
• Taper (Angle) calculation - the DRO calculates the taper angle of a part by simply touching 2 points.
• 1/2 key - when the LED is on the DRO displays twice the actual axis movement.
• Enter key, CLEAR, +/-
• Inches / Metric.
• Tool - set up to 20 tools that may be used for the part (ABS mode). The possible reference points are from 0 to 19.
• Preset X and Z key. 
• Calculator - carry out trigonometric calculation and simply use the result to preset to the desired axis. Or use the coordinates of the axes to carry out math operations. 
• Set Machine Zero Reference Point
• Recall.
• Allow a decimal digit to be switched off (coarse resolution) for cases in which fine resolution is not required.
• Scaling factor - it is possible to apply a scaling factor within ±9.999 for mold making applications.

 Specification:

• 2 axis, large LED display, 14.1mm high.
• Sub-D HD Type 15 connectors.
• Universal power supply, between 100V AC and 240V AC (+10% -15%) to protect them from changes in voltage, power micro-surges and on-line noise.
• Main frequency of 0 Hz (DC) and between 45Hz and 400Hz.
• Reliable.
• CE obtained.